2D Galvo Scanner Laser Ukumaka |Welding |Ukusika |Ukuhlanza |Uchungechunge lwe-G3
Incazelo & Isingeniso
I-G3 Ult II Galvo Scanner isebenzisa izindlela eziningi zokulwa nokuphazamiseka, enikeza ukungatheleleki okuqinile kwesistimu, ukwethembeka okuphezulu, ukuhambisana okuhle, ukuphindaphinda okuphezulu, nesikhathi sokuphendula esifushane.Uhlelo lusebenzisa idizayini edidiyelwe enosayizi omncane, isisindo esilula, nokuvala uphawu okuhle kakhulu, okuqinisekisa ukuzinza ngesikhathi sokusebenza isikhathi eside.
I-G3 Std Galvo Scanner iyimojula yokuskena enesivinini esikhulu, ezinzile, futhi enembe kakhulu, esetshenziswa kabanzi ezinhlelweni ezifana nokumaka impahla ye-laser, ukusikwa kwe-laser, ukushiswa kwe-laser, ukuphrinta kwe-3D, ukuhlanzwa kwe-laser, izinto zokuhambisa intambo yendiza, ikhodi ye-QR esheshayo. ukuskena, nokuningi.Ilungele izimo zohlelo lokusebenza ezimaphakathi nezisezingeni eliphezulu.
I-G3 Base Galvo Scanner iyimojula yokuskena ye-optical eguquguqukayo enezindleko ezihle kakhulu nokusebenza okuhle kokucubungula.Isetshenziswa kabanzi ezimbonini ezifana nokumaka impahla ye-laser, ukusika i-laser, i-laser welding, ukuphrinta kwe-3D, ukuhlanzwa kwe-laser, futhi ifanele izinhlelo zokusebenza ezijwayelekile zokucubungula i-laser.
Izithombe Zomkhiqizo
G3 Ult II
I-G3 St
G3 Isisekelo
Imininingwane
| Ukucushwa | ||
| Iskena | Ububanzi bokufaka | 10 mm |
| Iphutha Lokulandelela | 0.11 ms | |
| Isivinini sokumaka | 8000 mm/s | |
| Isivinini Sokumisa | 15000 mm/s | |
| 1% Isikali Esigcwele | 0.26 ms | |
| 10% Isikali Esigcwele | 0.62 ms | |
| Ukuphindaphinda | < 2 μrad | |
| Thola i-Drift | < 100 ppm/K | |
| I-Offset Drift | <25 μrad/K | |
| Dlulisa Ngehora lesi-8 | <0.1 mrad | |
| Ukungalandeli umugqa | < 0.4% | |
| I-Engeli yokuskena | ± 0.35 rad | |
| Isixhumi esibonakalayo | XY2 - 100 | |
| Ubude begagasi | 10600 nm, 1064 nm, 532 nm, 355 nm | |
| Okuyisisekelo | Amandla | ± 15 V DC, 5 A |
| Isisindo | 2100 g | |
| ITemp Esebenzayo | 25 ± 10°C | |
| Ukucushwa | ||
| Iskena | Ububanzi bokufaka | 10 mm |
| Iphutha Lokulandelela | 0.11 ms | |
| Isivinini sokumaka | 10000 mm/s | |
| Isivinini Sokumisa | 16000 mm/s | |
| 1% Isikali Esigcwele | 0.26 ms | |
| 10% Isikali Esigcwele | 0.62 ms | |
| Ukuphindaphinda | < 2 μrad | |
| Thola i-Drift | < 100 ppm/K | |
| I-Offset Drift | <25 μrad/K | |
| Dlulisa Ngehora lesi-8 | <0.15 mrad | |
| Ukungalandeli umugqa | < 1% | |
| I-Engeli yokuskena | ± 0.35 rad | |
| Isixhumi esibonakalayo | XY2 - 100 | |
| Ubude begagasi | 10600 nm, 1064 nm, 532 nm, 355 nm | |
| Okuyisisekelo | Amandla | ± 15 V DC, 3 A |
| Isisindo | 1800 g | |
| ITemp Esebenzayo | 25 ± 10°C | |
| Ukucushwa | ||
| Iskena | Ububanzi bokufaka | 10 mm |
| Iphutha Lokulandelela | 0.2 ms | |
| Isivinini sokumaka | 5000 mm/s | |
| Isivinini Sokumisa | 10000 mm/s | |
| 1% Isikali Esigcwele | 0.32 ms | |
| 10% Isikali Esigcwele | 1.2 ms | |
| Ukuphindaphinda | <2 μrad | |
| Thola i-Drift | < 150 ppm/K | |
| I-Offset Drift | <50 μrad/K | |
| Dlulisa Ngehora lesi-8 | <0.2 mrad | |
| Ukungalandeli umugqa | < 1% | |
| I-Engeli yokuskena | ± 0.35 rad | |
| Isixhumi esibonakalayo | XY2 - 100 | |
| Ubude begagasi | 10600 nm, 1064 nm, 532 nm, 355 nm | |
| Okuyisisekelo | Amandla | ± 15 V DC, 3 A |
| Isisindo | 1800 g | |
| ITemp Esebenzayo | 25 ± 10°C | |
