2D Galvo Scanner Laser Marking |alxanka |Goynta |Nadiifinta |Taxanaha G3
Sharaxaada & Hordhac
Scanner G3 Ult II Galvo wuxuu qaataa tallaabooyin fara badan oo ka-hortagga faragelinta ah, isagoo siinaya difaac adag, isku halleyn sare, toosnaan wanaagsan, ku celcelin sare, iyo waqti jawaab celin gaaban.Nidaamku wuxuu isticmaalaa naqshad isku dhafan oo leh cabbir yar, miisaan fudud, iyo xirid aad u fiican, hubinta xasilloonida inta lagu jiro hawlgalka dheeraadka ah.
G3 Std Galvo Scanner waa mid xawaare sare leh, xasiloon, oo sax ah moduleka iskaanka indhaha, oo si ballaaran loogu isticmaalo codsiyada sida calaamadaynta walxaha laser, goynta laser, alxanka laysarka, daabacaadda 3D, nadiifinta laysarka, agabka fiilada duulista, koodhka QR ee degdega ah iskaanka, iyo qaar kaloo badan.Waxay ku habboon tahay xaaladaha codsiga badhtamaha ilaa dhamaadka-sare.
Sawirka G3 Base Galvo Scanner waa nooc iskaanka indhaha oo kala duwan leh oo leh kharash-oolnimo aad u wanaagsan iyo waxqabad habaysan oo wanaagsan.Waxaa si weyn loo isticmaalaa in warshadaha sida calaamadaynta walxaha laser, goynta laser, alxanka laser, daabacaadda 3D, nadiifinta laser, oo ku haboon codsiyada processing laser caadiga ah.
Sawirada Alaabta
G3 Ult II
G3 Std
Saldhigga G3
Tilmaamaha
| Habaynta | ||
| Sawir qaade | Dhexroorka galitaanka | 10 mm |
| Khaladka Dabagalka | 0.11 ms | |
| Xawaaraha calaamadaynta | 8000 mm/s | |
| Xawaaraha meelaynta | 15000 mm/s | |
| 1% Miisaanka Buuxda | 0.26 ms | |
| 10% Miisaanka Buuxda | 0.62 ms | |
| Ku celcelinta | < 2 μrad | |
| Gaadh-qaadista | <100 ppm/K | |
| Dejinta Wadista | < 25 μrad/K | |
| Socod ka badan 8 saacadood | <0.1 mrad | |
| Aan toos ahayn | <0.4% | |
| Xagasha iskaan | ± 0.35 rad | |
| Interface | XY2 - 100 | |
| Mawjada dhererka | 10600 nm, 1064 nm, 532 nm, 355 nm | |
| Aasaaska | Awood | ± 15 V DC, 5 A |
| Miisaanka | 2100 g | |
| Heerkulka Shaqada | 25 ± 10°C | |
| Habaynta | ||
| Sawir qaade | Dhexroorka galitaanka | 10 mm |
| Khaladka Dabagalka | 0.11 ms | |
| Xawaaraha calaamadaynta | 10000 mm/s | |
| Xawaaraha meelaynta | 16000 mm/s | |
| 1% Miisaanka Buuxda | 0.26 ms | |
| 10% Miisaanka Buuxda | 0.62 ms | |
| Ku celcelinta | < 2 μrad | |
| Gaadh-qaadista | <100 ppm/K | |
| Dejinta Wadista | < 25 μrad/K | |
| Socod ka badan 8 saacadood | <0.15 mrad | |
| Aan toos ahayn | < 1% | |
| Xagasha iskaan | ± 0.35 rad | |
| Interface | XY2 - 100 | |
| Mawjada dhererka | 10600 nm, 1064 nm, 532 nm, 355 nm | |
| Aasaaska | Awood | ± 15 V DC, 3 A |
| Miisaanka | 1800 g | |
| Heerkulka Shaqada | 25 ± 10°C | |
| Habaynta | ||
| Sawir qaade | Dhexroorka galitaanka | 10 mm |
| Khaladka Dabagalka | 0.2 ms | |
| Xawaaraha calaamadaynta | 5000 mm/s | |
| Xawaaraha meelaynta | 10000 mm/s | |
| 1% Miisaanka Buuxda | 0.32 ms | |
| 10% Miisaanka Buuxda | 1.2 ms | |
| Ku celcelinta | <2 μrad | |
| Gaadh-qaadista | <150 ppm/K | |
| Dejinta Wadista | < 50 μrad/K | |
| Socod ka badan 8 saacadood | <0.2 mrad | |
| Aan toos ahayn | < 1% | |
| Xagasha iskaan | ± 0.35 rad | |
| Interface | XY2 - 100 | |
| Mawjada dhererka | 10600 nm, 1064 nm, 532 nm, 355 nm | |
| Aasaaska | Awood | ± 15 V DC, 3 A |
| Miisaanka | 1800 g | |
| Heerkulka Shaqada | 25 ± 10°C | |
