Ukupholisa Umoya kwe-Ultraviolet (UV) Laser 355nm- JPT Lark 3W
Uchungechunge lwe-JPT UV Laser Lark 355nm, 3W, Ukupholisa Umoya
I-Lark-355-3A ingumkhiqizo wakamuva we-UV ochungechungeni lwe-Lark, olusebenzisa indlela yokuphatha ukushisa ehlanganisa ukushabalalisa ukushisa komoya kanye nokushabalalisa ukushisa komoya. Uma kuqhathaniswa ne-Seal-355-3S, ayidingi umshini wokupholisa amanzi.
Uma kuqhathaniswa nezinye izinhlobo, ngokwemigomo yokukhanya, ububanzi be-pulse buncane (<18ns@40 KHZ), imvamisa yokuphindaphinda iphakeme (40KHZ), ikhwalithi ye-beam ingcono (M2≤1.2), kanye nokuzungeza okuphezulu kwamabala (> 90%); Ngokuphathelene nomklamo wesakhiwo, incane ngobukhulu, isisindo silula, futhi inhle kakhulu; Ngokuphathelene nomklamo wokulawula kagesi, inamandla okuphazamisana ne-electromagnetic aqinile, ukusebenza kahle okuphezulu kokuphathwa kokushisa, kanye ne-interface enobungane yokusebenzisana ne-GUI.
Lezi zici zenza i-Lark-355-3A ibe nokuzinza okungcono kwesakhiwo kanye nokuzivumelanisa nezimo kwemvelo okuqinile, bese ifinyelela izici ezifana nekhwalithi enhle yemisebe, ukuzinza kwamandla aphezulu, isikhathi eside sokuphila, ukuqina okuphezulu, okulula ukuyifaka, kanye nokungabi nokugcinwa...
Isithombe Somkhiqizo
Kungani Uthenga Ku-JCZ?
Njengomlingani oqakathekile, sithola intengo kanye nensizakalo ekhethekile.
I-JCZ ithola intengo ephansi kakhulu njengomlingani oqanjiwe, ngezinkulungwane ze-laser ezi-odwe minyaka yonke. Ngakho-ke, amakhasimende anganikezwa intengo encintisanayo.
Kuhlala kuyinkinga ebuhlungu kumakhasimende uma izingxenye eziyinhloko ezifana ne-laser, i-galvo, ne-laser controller zivela kubahlinzeki abahlukene lapho zidinga ukwesekwa. Ukuthenga zonke izingxenye eziyinhloko kumhlinzeki oyedwa othembekile kubonakala kuyisisombululo esingcono kakhulu futhi kusobala ukuthi i-JCZ iyindlela engcono kakhulu.
I-JCZ akuyona inkampani yokuhweba, sinabasebenzi abangaphezu kuka-70 abangochwepheshe be-laser, kagesi, onjiniyela besofthiwe, kanye nabasebenzi abanolwazi abangaphezu kuka-30 emnyangweni wokukhiqiza. Izinsizakalo ezenziwe ngokwezifiso ezifana nokuhlola okwenziwe ngokwezifiso, ukuxhuma izintambo kusengaphambili, kanye nokuhlanganisa ziyatholakala.
Imibuzo Evame Ukubuzwa
Isizathu sokuthi ukukhanya kwe-ultraviolet kungcono kune-infrared light waves kanye nama-visual light waves ukuthi ama-ultraviolet laser abhubhisa ngqo izibopho zamakhemikhali ezixhumanisa izingxenye ze-athomu zale nto. Le ndlela, ebizwa ngokuthi inqubo "ebandayo", ayikhiqizi ukushisa endaweni ezungezile kodwa ihlukanisa ngqo le nto ibe ama-athomu, ngaphandle kokubhubhisa indawo ezungezile. I-ultraviolet laser inezinzuzo ze-wavelength emfushane, ukugxila okulula, ukuhlushwa kwamandla, kanye nesinqumo esiphezulu. Iphinde ibe nokunemba okuphezulu kokucubungula, ububanzi obuncane bomugqa, ikhwalithi ephezulu, umphumela omncane wokushisa, ukuzinza okuhle kwesikhathi eside, futhi ingacubungula ihluzo ezahlukene ezingajwayelekile kanye namaphethini angajwayelekile. Isetshenziswa kakhulu ekwenzeni i-micromachining enhle, ikakhulukazi ukubhoboza okuseqophelweni eliphezulu, ukusika kanye nokwelapha nge-grooving. I-Uv laser isetshenziswe ngempumelelo ezinsimbini, kuma-semiconductors, kuma-ceramics, engilazini, nasezintweni ezahlukahlukene ze-polymer.
Kuhlanganiswe ukukhanya okuluhlaza okwesibhakabhaka kwesokudla ukuze kuhlolwe kuqala futhi isandisi se-6X/10X somsebe singakhethwa. Sicela wabelane ngesicelo sakho, futhi unjiniyela wethu uzosikisela ukuthi yisiphi isandisi esizofaneleka.
Imininingwane
| Iyunithi Yepharamitha | Ipharamitha |
| Imodeli Yomkhiqizo | I-Lark-355-3A |
| Ubude begagasi | 355 nm |
| Amandla Aphakathi | >3 w@40 kHz |
| Ubude be-Pulse | <18ns@40kHz |
| Ibanga Lesilinganiso Sokuphindaphinda Kwe-Pulse | 20 kHz-200 kHz |
| Imodi Yesikhala | I-TEM00 |
| (M²) Ikhwalithi Yomsebe | I-M²≤1.2 |
| Ukujikeleza kwe-Beam | >90% |
| I-Beam Full Divergence Angle | <2 mrad |
| Ububanzi be-Beam (1/e²) | Okungakhulisi:0.7土0.1 mm |
| Isilinganiso sokwehlukana | >100:1 |
| Ukuqondiswa kwe-Polarization | Okuvundlile |
| Ukuzinza Kwamandla Okumaphakathi | I-RMS≤3%@amahora angu-24 |
| Ukuzinza Kwamandla Okuphamba Komoya Kuya Komoya | I-RMS≤3%@40 kHz |
| Izinga Lokusebenza | 0℃~40℃ |
| Izinga Lokushisa Lesitoreji | -15℃~50℃ |
| Indlela Yokupholisa | Ukupholisa umoya |
| I-Voltage Yokunikezela | I-DC12V |
| Ukusetshenziswa Kwamandla Okumaphakathi | 180 w |
| Ubukhulu Obuthathu | 313×144x126 mm(WxDxH) |
| Isisindo | 6.8 kg |
Ubukhulu Bomkhiqizo
