English
  • I-Laser Marking Control Software
  • Isilawuli se-Laser
  • Ikhanda le-Laser Galvo Scanner
  • I-Fiber/UV/CO2 /Green/Picosecond/Femtosecond Laser
  • I-Laser Optics
  • Imishini ye-OEM/OEM Laser | Ukumaka | Welding | Ukusika | Ukuhlanza | Ukunquma

I-3D Laser Galvo Scan Head China ene-XYZ Axis – GO3D-T

I-3D Laser Galvo Scan Head China ene-XYZ Axis – GO3D-T Isithombe Esifakiwe
  • I-3D Laser Galvo Scan Head China ene-XYZ Axis – GO3D-T
  • I-3D Laser Galvo Scan Head China ene-XYZ Axis – GO3D-T
  • I-3D Laser Galvo Scan Head China ene-XYZ Axis – GO3D-T
  • I-3D Laser Galvo Scan Head China ene-XYZ Axis – GO3D-T
  • I-3D Laser Galvo Scan Head China ene-XYZ Axis – GO3D-T

Incazelo emfushane:


  • Intengo yokukodwa:Kuyaxoxiswa
  • Imigomo Yokukhokha:100% Ngaphambili
  • Indlela yokukhokha:T/T, Paypal, Credit Card...
  • Izwe azalelwe kulo:China

    • Imininingwane Yomkhiqizo

    Omaka bomkhiqizo

    I-GO3D-T 3 Axis XYZ Dynamic Focusing Laser Galvo Scanner Head for Laser Marking nezinye izinhlelo zokusebenza

    I-GO3-T Series 3D laser galvo scanner inhloko ye-XYZ axis. I-Z-axis isebenza njenge-focus shifter, ezoshintsha ibanga lokusebenza phakathi kwelensi ye-f-theta nezinto ngokuya ngobude bento. Ngokusebenza nesilawuli se-DLC2-M4-3D kanye nesofthiwe ye-EZCAD3, ukucubungula nge-laser njengokumaka kungenziwa kalula nangempumelelo.

    Izithombe Zomkhiqizo

    Imibuzo Evame Ukubuzwa

    Uyini umehluko phakathi kwe-3D galvo ne-2D galvo?

    Ukusetshenziswa okujwayelekile kwesithwebuli se-3D
    Ukumakwa kwendawo, ukukhululeka, ukuhlanza, ukuthungwa kwesikhunta, ukwelashwa kwendawo.

    Ukusetshenziswa okujwayelekile kwesithwebuli se-2D

    Ukumaka, ukucubungula indiza eku-inthanethi, ukukhiqiza okungeziwe

    Imininingwane

    Imodeli: I-GO3D-T Series
    Iphrothokholi XY2-100
    I-Beam Expansion factor 2.0X 1.67X 1.85X
    Imbobo yokufaka ye-XY 10mm 12mm 10mm 12mm 10mm 12mm
    Imbobo yokufaka 5.00mm 6.00mm 5.98mm 7.18mm 5.40mm 6.48mm
    Ubude begagasi I-GO3-T-355 I-GO3D-T-532/1064 I-GO3D-T-10600
    Iphrothokholi XY2-100
    Isivinini sokumaka 6000mm/s
    Isivinini Sokumisa 12m/s 10m/s 12m/s 10m/s 12m/s 10m/s 12m/s 10m/s
    Inkambu yokumaka 150*150mm ±35mm nge-F=254 lens
    Inani elikhulu lika-Z lingazuzwa ngelensi enkulu ye-F-theta.
    Ukunikezwa kwamandla kagesi 15VDC 3A
    Inkambu yokumaka 150*150*±30mm
    inani lika-Z elijulile lingafinyelelwa ngokusebenzisa ilensi enkulu ye-F-theta.
    Ukusebenza Okunamandla
    Isikhathi Sephutha Lokulandelela 0.22ms 0.36ms 0.22ms 0.36ms 0.22ms 0.36ms 0.22ms 0.36ms
    Ukuphindaphinda ＜22 ihora ＜22 ihora ＜22 ihora ＜22 ihora ＜22 ihora ＜22 ihora ＜22 ihora ＜22 ihora
    Thola ukukhukhuleka 80ppm/K 80ppm/K 80ppm/K 80ppm/K 80ppm/K 80ppm/K 80ppm/K 80ppm/K
    I-offset drift 30urad/K 30urad/K 30urad/K 30urad/K 30urad/K 30urad/K 30urad/K 30urad/K
    1% wesilinganiso esigcwele 0.30ms 0.40ms 0.30ms 0.40ms 0.30ms 0.40ms 0.30ms 0.40ms
    10% wesilinganiso esigcwele 0.80ms 1.20ms 0.80ms 1.20ms 0.80ms 1.20ms 0.80ms 1.20ms
    I-Non-Linearity ＜0.9mrad ＜0.9mrad ＜0.9mrad ＜0.9mrad ＜0.9mrad ＜0.9mrad ＜0.9mrad ＜0.9mrad
    Ukuhamba isikhathi eside ngaphezu kwamahora angu-8 ＜0.3mRad ＜0.3mRad ＜0.3mRad ＜0.3mRad ＜0.3mRad ＜0.3mRad ＜0.3mRad ＜0.3mRad
    Ukusebenza kwe-Optical
    Ukuchezuka Okuvamile ±0.39rad ±0.39rad ±0.39rad ±0.39rad ±0.39rad ±0.39rad ±0.39rad ±0.39rad
    Iphutha lokuzuza ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad
    I-Zero Offset ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad
    Izinga Lokushisa Lokusebenza 10-40 ℃ 10-40 ℃ 10-40 ℃ 10-40 ℃ 10-40 ℃ 10-40 ℃ 10-40 ℃ 10-40 ℃
    Ukugcina Izinga lokushisa -20-60℃ -20-60℃ -20-60℃ -20-60℃ -20-60℃ -20-60℃ -20-60℃ -20-60℃

    Ubukhulu bomkhiqizo

    2D Umdwebo
    3D Umdwebo
    2D Umdwebo

    I-3D SCANHEAD

    3D Umdwebo

    Ividiyo ye-3D Laser Galvo

  • Okwedlule:
  • Olandelayo:

    • Izigaba zemikhiqizo