Shugaban Scan na Laser Galvo na 3D na China tare da XYZ Axis - GO3D-T

Takaitaccen Bayani:

Farashin Naúrar:Mai sulhu

Sharuɗɗan Biyan Kuɗi:100% a gaba

Hanyar Biyan Kuɗi:T/T, Paypal, Katin Kiredit...

Ƙasar Asali:China

Aika mana imel

Cikakken Bayani game da Samfurin

Alamun Samfura

Shugaban Na'urar Duba Laser Galvo Mai Haɓaka GO3D-T 3 Axis XYZ Dynamic Focusing Laser don Alamar Laser da sauran Aikace-aikace

Kan na'urar daukar hoton laser galvo ta GO3-T Series 3D yana tare da axis na XYZ. Axis na Z yana aiki azaman mai canza hankali, wanda zai canza nisan aiki tsakanin ruwan tabarau na f-theta da abubuwa gwargwadon tsayin abin. Ta hanyar aiki tare da mai sarrafa DLC2-M4-3D da software na EZCAD3, ana iya yin sarrafa laser kamar alama cikin sauƙi da inganci.

Hotunan Samfura

Tambayoyin da ake yawan yi

Menene bambanci tsakanin galvo na 3D da galvo na 2D?

Amfani da na'urar daukar hoto ta 3D yawanci
Alamar saman, sauƙi, tsaftacewa, yanayin mold, maganin farfajiya.

Amfani da na'urar daukar hoto ta 2D yawanci

Alamar, sarrafa jirgin sama ta kan layi, ƙera ƙari

Bayani dalla-dalla

Samfuri:	Jerin GO3D-T
Yarjejeniya	XY2-100
Faɗaɗar Haske	2.0X		1.67X		1.85X
Maɓallin Shigarwa na XY	10mm	12mm	10mm	12mm	10mm		12mm
Maɓallin Shigarwa	5.00mm	6.00mm	5.98mm	7.18mm	5.40mm		6.48mm
Tsawon Raƙuman Ruwa	GO3-T-355		GO3D-T-532/1064		GO3D-T-10600
Yarjejeniya	XY2-100
Saurin Alamar	6000mm/s
Saurin Matsayi	12m/s	10m/s	12m/s	10m/s	12m/s	10m/s	12m/s	10m/s
Filin Alamar	150*150mm ±35mm tare da ruwan tabarau na F=254
Filin Alamar	Ana iya cimma mafi girman ƙimar Z ta amfani da babban ruwan tabarau na F-theta.
Tushen wutan lantarki	15VDC 3A
Filin Alamar	150150±30mm
Filin Alamar	Ana iya isa ga zurfin ƙimar Z ta amfani da babban ruwan tabarau na F-theta.
Aiki Mai Sauƙi
Lokacin Kuskuren Bibiya	0.22ms	0.36ms	0.22ms	0.36ms	0.22ms	0.36ms	0.22ms	0.36ms
Maimaitawa	＜22urad	＜22urad	＜22urad	＜22urad	＜22urad	＜22urad	＜22urad	＜22urad
Sami karkacewa	80ppm/K	80ppm/K	80ppm/K	80ppm/K	80ppm/K	80ppm/K	80ppm/K	80ppm/K
Juyawa daga offset	30urad/K	30urad/K	30urad/K	30urad/K	30urad/K	30urad/K	30urad/K	30urad/K
1% na cikakken sikelin	0.30ms	0.40ms	0.30ms	0.40ms	0.30ms	0.40ms	0.30ms	0.40ms
10% na cikakken sikelin	0.80ms	1.20ms	0.80ms	1.20ms	0.80ms	1.20ms	0.80ms	1.20ms
Ba a Daidaita Daidaito ba	<0.9mrad	<0.9mrad	<0.9mrad	<0.9mrad	<0.9mrad	<0.9mrad	<0.9mrad	<0.9mrad
Tafiya ta dogon lokaci a cikin awanni 8	<0.3mrad	<0.3mrad	<0.3mrad	<0.3mrad	<0.3mrad	<0.3mrad	<0.3mrad	<0.3mrad
Aikin gani
Juyawa ta Al'ada	±0.39rad	±0.39rad	±0.39rad	±0.39rad	±0.39rad	±0.39rad	±0.39rad	±0.39rad
Kuskuren riba	<5mrad	<5mrad	<5mrad	<5mrad	<5mrad	<5mrad	<5mrad	<5mrad
Sifili Daidaito	<5mrad	<5mrad	<5mrad	<5mrad	<5mrad	<5mrad	<5mrad	<5mrad
Zafin Aiki	10-40℃	10-40℃	10-40℃	10-40℃	10-40℃	10-40℃	10-40℃	10-40℃
Zafin Ajiya	-20-60℃	-20-60℃	-20-60℃	-20-60℃	-20-60℃	-20-60℃	-20-60℃	-20-60℃