2 Axis Laser Galvo Scanner GO7 Series China
Intloko ye-Laser ye-2D ye-2D ye-Galvo ye-Scanner echanekileyo ene-XY Axis yokuMakisha i-Laser, i-Etching, iMizobo, i-Cutting, i-Welding...
Intloko ye-GO7 yedijithali ye-laser galvo scanner yaphehlelelwa yi-JCZ ngo-2016, ngexabiso elikhuphisanayo, uzinzo oluphezulu, kunye nezinga eliphantsi lokulungisa, elisetyenziswa ngokubanzi koomatshini belaser bokuphawula, ukukrola, ukukrola, ukuwelda, ukusika...
Inobungakanani obahlukeneyo besipili obukhethiweyo (8mm, 10mm, 12mm, 14mm, 16mm, 20mm...) kwaye igqunywe ngamaza obude (355,532,1064,10600nm) kwiilaser ezifana nefiber, CO2, YAG, UV, Green...
Imifanekiso yeMveliso
Ii-FAQs
1. Isibuko sokugquma: I-laser eyahlukileyo ifuna izibuko ezigqunywe ngokwahlukileyo kwi-laser galvo.Ngokuqhelekileyo, i-355nm ye-laser ye-UV, i-532nm ye-laser eluhlaza, i-1064nm ye-YAG kunye ne-Fiber laser, i-10600nm ye-CO2 laser.I-laser beam ayinakubonakaliswa ukuba ubude be-wavelength ye-coated ayihambelani nobude be-laser.
2. I-input aperture: Kuthetha ubungakanani bomngxuma we-laser galvo apho i-laser beam ingena khona.Ukuba ubungakanani be-beam bukhulu kune-aperture yokufaka, kuya kubiza inkunkuma ye-laser beam.
Sonke siyazi ukuba ukuba isantya siphezulu, ukuchaneka kubi.Ibhalansi phakathi kwesantya kunye nokuchaneka okubaluleke kakhulu.Ukuthetha kobugcisa, i-2000mm / s yanele ukumakisha okuqhelekileyo, ngokuchaneka okulungileyo.
Iinkcukacha
| Umzekelo: | GO7 Series | |||||
| Ubude bamaza | 355nm,532nm,1064nm,10600nm... | |||||
| Ujongano | XY2-100 | |||||
| Isimbo soNgeniso(mm) | 8 | 10 | 12 | 14 | 16 | 20 |
| Ukusebenza okunamandla | ||||||
| Ixesha lemposiso yokulandelela (ms) | 0.18 | 0.22ms | 0.36 | 0.38 | 0.4 | 0.4 |
| Ukuphindaphinda (urad) | ＜22 | ＜22 | ＜22 | ＜22 | ＜22 | ＜22 |
| I-Gaindrift(ppm/K) | 80 | 80 | 80 | 80 | 80 | 80 |
| Offsetdrift(urad/K) | 30 | 30 | 30 | 30 | 30 | 30 |
| 1% yesikali esipheleleyo(ms) | 0.25 | 0.3 | 0.4 | 0.65 | 0.7 | 0.8 |
| I-10% yesikali esipheleleyo(ms) | 0.7 | 0.8 | 1.2 | 1.6 | 1.7 | 1.8 |
| Non-Linearity(mrad) | ＜0.9 | ＜0.9 | ＜0.9 | ＜0.9 | ＜0.9 | ＜0.9 |
| Ukuqhuba ixesha elide kwiiyure ezi-8 (mrad) | ＜0.3 | ＜0.3 | ＜0.3 | ＜0.3 | ＜0.3 | ＜0.3 |
| Isantya esiqhelekileyo | ||||||
| Isantya sokumakisha(mm/s) | 4000 | 3000 | 2500 | 2200 | 2000 | 1300 |
| Isantya sokuma (m/s) | 15 | 12 | 10 | 8 | 7 | 6 |
| Ukusebenza okubonakalayo | ||||||
| Uphambuko oluqhelekileyo(Rad) | ±0.39 | ±0.39 | ±0.39 | ±0.39 | ±0.39 | ±0.39 |
| Fumana impazamo(mrad) | ＜5 | ＜5 | ＜5 | ＜5 | ＜5 | ＜5 |
| Zero Offset (mrad) | ＜5 | ＜5 | ＜5 | ＜5 | ＜5 | ＜5 |
| Ubushushu bokusebenza(℃) | 10-40 | 10-40 | 10-40 | 10-40 | 10-40 | 10-40 |
| Ukugcina iqondo lobushushu(℃) | -20-60 | -20-60 | -20-60 | -20-60 | -20-60 | -20-60 |
| Iimfuno zamandla | ±15VDC,3A | ±15VDC,3A | ±15VDC,3A | ±15VDC,3A | ±15VDC,3A | ±15VDC,3A |
| Ubunzima(kg) | 1.5 | 1.9 | 2 | 2.4 | 2.6 | 4.3 |
