3D Laser Galvo Scanner Hlooho ea G3-3D Series
Hlooho e nepahetseng e phahameng le e phahameng ea lebelo le phahameng la Galvanometer bakeng sa ho tšoaea ka Laser, Welding, Cutting...
G3 3D laser galvo scanning system e etselitsoe ho nepahala le ho tsepamiso e phahameng haholo, ho kopanya pokello ea data, ts'ebetso ea data, taolo ea elektroniki, molateli oa mochini, litšoantšo tsa optical, puseletso ea optical, optical scanning, le mesebetsi e meng. e ntlafalitse mojule oa ho chencha axis, ka karabelo e potlakileng, e fetohang ka potlako le e tsitsitseng haholoanyane.Ho amohela mekhoa e sa tšoaneng e khahlanong le ho kena-kenana le ho kena-kenana, e na le matla a matla a ho thibela ho kena-kenana le ho kena-kenana, ho tšepahala ho phahameng, ho ba le linearity e ntle, ho nepahala ho phahameng ho pheta-pheta, le nako e khutšoanyane ea karabo.G3 3D e amohela sebopeho se kopaneng, boholo bo nyane, bo bobebe, le tiiso e ntle ho netefatsa botsitso tlasa maemo a nako e telele a ho sebetsa.
Software ea Ezcad3 le DLC controller, e sebelisoang le G3 3D galvo scanner e amohela algorithm ea puseletso ea lebone la ntlha-by-point e tsoetseng pele.Sistimi eohle e ka fihlela sebaka se senyenyane sa tsepamiso, sebaka se pharaletseng sa ho lekola, le maemo a holimo.
G3 3D scanning system e loketse ts'ebetso e rarahaneng ea holim'a metsi, ho betla ka botebo ba 3D, ho itšeha ka matla a phahameng, ho cheka, laser microfabrication, lisebelisoa tsa 3D, laser e potlakileng ea prototyping, joalo-joalo Ka ho roala seipone se nepahetseng le lense ea F-theta, e ka sebetsana le lisebelisoa tse fapaneng tse joalo. joalo ka tšepe, letlalo, rabara, lehong, lihlahisoa tsa bamboo, lithaele, polasetiki, 'mabole, jade, joalo-joalo.
Mehlala ea Litšoantšo
Litlhaloso
| Scanner | Lebelo la ho tshwaya | 4000mm/s | Positioning Speed | 10000mm/s |
| Phoso ea ho Lata | 0.25ms | Nonlinearity | <3.5mrad/44° | |
| 1% Sekala se felletseng | ≤0.4ms | Fumana Drift | <50PPM/K | |
| Offset Drift | <15μrad/k | Tsamaea ho feta 8h | <0.3mrad | |
| Skena Angle | ± 0.35rad | Seipone Aperture | 10 limilimithara | |
| Motheo | Sehokedi | XY2-100 | Mocheso o sebetsang | 25℃±10℃ |
| Matla | ±15VDC,3A | Wavelenght | 1064nm/ 532nm/355nm | |
| Z AXESE | Kenya Aperture | 7mm/3 limilimithara | Karolelano ea Beam | 1.4/ 3 |
| Focus Range | ± 30 limilimithara | Sebaka sa ho Tšoaea | 150 limilimithara (Lense ea F-theta e ka nkeloang sebaka) |
Boemo ba Sehlahisoa
