Ultraviolet (UV) Laser 355nm- JPT Seal 3W 5W 10W 15W
JPT UV Laser Seal Series 355nm, 3W, 5W
Bapisa le laser ea IR, ts'ebetso ea laser ea UV ke ho senya ka ho toba ntho e tlamahanoang ke lik'hemik'hale, Ts'ebetso e hlahisa mocheso o fokolang haholo ho fokotsa phello ea mocheso, thepa e sebetsitsoeng e fetohela boemong ba Atom, e fokotsa tšilafalo tikolohong.Karolo ea laser ea UV e khuts'oane ka bolelele ba leqhubu, boholo ba letheba, matla a matla, tharollo e phahameng, e loketse ho tšoaea ka nepo, tlhoko ea mola o mosesaane, ho tšoaea boleng ba boleng bo holimo, phello e fokolang ea mocheso, hape e na le botsitso ba nako e telele.E sebelisoa haholo ho micromachining, ho cheka likoti tse nyane, ho seha, ho ngola, e se e sebelisoa ho lisebelisoa tse ngata joalo ka tšepe, thepa ea semiconductor, ceramic, khalase le polymer.
JPT e entsoeng Seal-355-3/5 letoto la laser ea UV e felile pompo ea boemo bo tiileng ba laser.Moralo o tsitsitseng le o kopaneng oa li-resonator o etsa hore laser e sebetse hantle haholo, boleng bo botle ba mabone le botsitso bo phahameng.Ho phela nako e telele le ho hloka tlhokomelo.Moralo oa ka hare oa kamore ea LD o fokolitse tšitiso ea fiber.Moralo o mocha oa AIO, o boloka sebaka ebile o na le matla a matla a ho thibela tšitiso.
Seal-355-3/5S ke setho sa lelapa la Tiiso.Laser ea letoto lena e na le boleng bo botle ba borali (M2< 1.2) le litšobotsi tse phethahetseng tsa letheba (circularity>90%).Mochine oohle o nka moralo o kopantsoeng oa sebopeho, o kopanyang potoloho ea optical le ea kantle ea ho khanna, ho etsa hore letoto la lihlahisoa le be le matla a matla a ho thibela tšitiso.Ntlafatsa le ho ntlafatsa sebopeho se tiisitsoeng ka botlalo ho thibela ka nepo ho kena ha lerōle le kantle.Ka nako e ts'oanang, ho arohana ha limolek'hule tsa metsi a ka ntle ho etsa hore mochine oohle o be le litšobotsi tse matla tse khahlanong le mongobo, ho etsa hore letoto la Seal le khone ho ikamahanya le maemo a thata a indasteri.Ntle le moo, bophelo ba ts'ebeletso bo ka lelefatsoa haholo ka ho hlahisa sistimi ea ho itlhoekisa bakeng sa intracavity Joalo ka mofuta o ntlafalitsoeng oa Seal-355-3/5, laser e hlahisoang ea Seal-355-3/5S series ultraviolet solid-state lasers e na le khutsoanyane haholo bophara ba ho otla ha pelo (<10ns@60KHZ) le botsitso bo botle ba ho otla ha pelo (<3%RMS@60KHZ) ka sekhahla se mahareng le se phahameng sa ho pheta-pheta
Setšoantšo sa Sehlahisoa
Ke Hobane'ng ha U Reka ho JCZ?
Joaloka molekane ea nang le maano, re fumana theko le litšebeletso tse khethehileng.
JCZ e fumana theko e tlase ka ho fetesisa e le molekane ea nang le maano, ka likete tsa laser tse laetsoeng selemo le selemo.Ka hona, theko ea tlhōlisano e ka fanoa ho bareki.
E lula e le bothata ba hlooho ho bareki haeba likarolo tsa mantlha tse kang laser, galvo, laser controller li tsoa ho barekisi ba fapaneng ha ba hloka tšehetso.Ho reka likarolo tsohle tse ka sehloohong ho tsoa ho mofani a le mong ea ka tšeptjoang ho bonahala e le tharollo e molemo ka ho fetisisa 'me ho hlakile hore JCZ ke khetho e ntle ka ho fetisisa.
JCZ ha se k'hamphani ea khoebo, re na le laser ea litsebi tse fetang 70, lienjiniere tsa motlakase, tsa software, le basebetsi ba 30+ ba nang le boiphihlelo lefapheng la tlhahiso.Litšebeletso tse ikhethileng joalo ka tlhahlobo e ikhethileng, li-wiring tsa pele le kopano lia fumaneha.
Litlhaloso
| Nomoro ea Mohlala | Tiiso-355-3 | Tiiso-355-5 | |
| Wavelength | 355nm | ||
| Bolela Matla | > 3W@30kHZ | 2>5W@40kHZ | |
| Nako ea Pulse | <15ns@30kHz | <15ns@40kHz | |
| Maqhubu a Range | 20KHz-150KHz | ||
| Mokhoa oa Sebaka | TEMoo | ||
| Boleng ba Beam(M²) | M<1.2 | ||
| Beam Circularity | 2>90% | ||
| Beam Full Divergence Angle | <2 mrad | ||
| (1/e2)Beam Diameter | 0.7+0.1mm | ||
| Polarization karo-karolelano | > 100:1 | ||
| Boikutlo ba Polarization | E tshekaletseng | ||
| Karolelano ea Botsitso ba Matla | RMS<3%@24hr | ||
| Mocheso oa ho sebetsa.&RH | 15C~35"C;<80% | ||
| Mocheso oa Bobolokelo.&RH | -10°C~50C;<<90% | ||
| Mokhoa oa ho Pholisa | Pholiso ea metsi | ||
| Tlhokahalo ea Motlakase | DC12V | ||
| AveragePower Consumption | 300W | 350W | |
| Boholo ba Likarolo tse tharo | 302mm*180mm*114mm(L*W*H) | ||
| Boima ba 'mele | 9.26kg | ||
| Nomoro ea Mohlala | Seal-355-3S Seal-355-5S | |
| Wavelength | 355nm | |
| Bolela Matla | > 3W@40kHZ | > 5W@60kHZ |
| Nako ea Pulse | <10ns@40kHz | <10ns@60kHz |
| Maqhubu a Range | 30KHz-200KHz | |
| Mokhoa oa Sebaka | TEMoo | |
| (M²)Boleng ba Beam(M²) | M²≤1.2 | |
| Beam Circularity | >90% | |
| Beam Full Divergence Angle | ≤2mrad | |
| (1/e2)Beam Diameter | 0.7+0.lmm | |
| Polarization karo-karolelano | > 100:1 | |
| Boikutlo ba Polarization | E tshekaletseng | |
| Karolelano ea Botsitso ba Matla | RMS≤3%@24hr | |
| Pulse-to-PulseStability | RMS≤3%@40KHz | RMS≤3%@60KHz |
| Mocheso oa ho sebetsa.&RH | 10 ℃ ~ 35 ℃;<80% | |
| Mocheso oa Bobolokelo.&RH | -15 ℃ ~ 50 ℃;<90% | |
| Mokhoa oa ho Pholisa | Pholiso ea metsi | |
| Tlhokahalo ea Motlakase | DC12V | |
| Karolelano ea Tšebeliso ea Matla | 300W | 350W |
| Boholo ba Likarolo tse tharo | 302mm*180mm*114mm(L*W*H) | |
| Boima ba 'mele | 9.26kg | |
| Nomoro ea Mohlala | Seal-355-10S |
| Wavelength | 355nm |
| Bolela Matla | ≥10W@60kHz |
| Nako ea Pulse | ≤I1ns@60kHz |
| Maqhubu a Range | 40KHz-300KHz |
| Mokhoa oa Sebaka | TEMoo |
| BeamQuality(M²) | M≤l.2 |
| Beam Circularity | >90% |
| Beam Full Divergence Angle | ≤2mrad" |
| (1/e2)Beam Diameter | 0.8+0.1mm |
| Polarization karo-karolelano | > 100:1 |
| Boikutlo ba Polarization | E tshekaletseng |
| Karolelano ea Botsitso ba Matla | RMSS3%@24hr |
| Pulse-to-Pulse Stability | RMSS3%@60KHz |
| Mocheso oa ho sebetsa.&RH | 15"C~35"C;<<80% |
| Mocheso oa Bobolokelo.&RH | 0"C~50"C;<90% |
| Mokhoa oa ho Pholisa | Pholiso ea metsi |
| Tlhokahalo ea Motlakase | DC36V |
| Karolelano ea Tšebeliso ea Matla | 250W |
| Boholo ba Likarolo tse tharo | 337mm*180mm*114mm(L*W*H) |
| Boima ba 'mele | 13.2kg |
| Nomoro ea Mohlala | Seal-355-15S |
| Wavelength | 355nm |
| Bolela Matla | ≥15W@60KHZ |
| Nako ea Pulse | ≤12ns@60KHZ |
| Maqhubu a Range | 40KHz-300KHZ |
| Mokhoa oa Sebaka | TEMoo |
| (M²)Boleng ba Beam(M²) | M²<1.2 |
| Beam Circularity | >90% |
| Beam Full Divergence Lenaka | ≤2mrad |
| (1/e2)Beam Diameter | 0.8+0.1mm2 |
| Polarization karo-karolelano | > 100:1 |
| Boikutlo ba Polarization | E tshekaletseng |
| Karolelano ea Matla Botsitso | RMS≤3%@24hr |
| Pulseto-Pulse Stability | RMS≤3%@60KHz |
| Mocheso oa ho sebetsa.&RH | 15°C~35°C;<80% |
| Mocheso oa Bobolokelo.&RH | 0°C~50°C;<90% |
| Mokhoa oa ho Pholisa | Pholiso ea metsi |
| Tlhokahalo ea Motlakase | DC36V |
| Karolelano ea Matla Tshebediso | 300W |
| Boholo ba Likarolo tse tharo | 337mm*180mm*114mm(L*W*H) |
| boima | 13.2kg |
Boemo ba Sehlahisoa
