Ultraviolet (UV) Laser 355nm- JPT Akara 3W 5W 10W 15W
JPT UV Laser Seal Series 355nm, 3W, 5W
Tulee ya na laser IR, usoro laser UV na-agbaji ihe njikọ kemịkalụ, Usoro ahụ na-emepụta obere okpomọkụ iji belata mmetụta ọkụ, ihe edoziri na-atụgharị gaa na ọkwa Atom, belata mmetọ na gburugburu ebe obibi.Njirimara nke laser UV dị mkpụmkpụ na ogologo ogologo, obere ntụpọ ntụpọ, ike siri ike, ngwọta dị elu, ọ dị mma maka akara nkenke, ihe achọrọ linewidth dị warara, akara dị elu, mmetụta dị obere, yana nkwụsi ike ogologo oge.A na-eji ya eme ihe na micromachining, mkpọpu oghere micro, ịcha, ide ihe, etinyelarị ọtụtụ ihe dị ka igwe, ihe semiconductor, seramiiki, iko na polymer.
JPT mere Akara-355-3 / 5 usoro UV laser na-akwụsị mgbapụta siri ike-ala laser.Stable na kọmpat resonator imewe na-eme ka arụmọrụ laser dị elu, ịdị mma beam dị mma na nkwụsi ike dị elu.Ogologo ndụ na enweghị mmezi.Nhazi LD nke ime ụlọ ahụ belatara nnyonye anya eriri.Nhazi ọhụrụ nke AIO, ọ na-echekwa ohere ma nwee ikike mgbochi mgbochi siri ike.
Seal-355-3/5S bụ onye otu ezinụlọ Seal.Laser nke usoro isiokwu a nwere ọmarịcha ọkụ ọkụ (M2<1.2) na njirimara ntụpọ zuru oke ( okirikiri>90%).Igwe ahụ dum na-eji usoro nhazi ihe eji eme ihe, nke na-ejikọta sekit ịnya ụgbọ ala na nke mpụga, na-eme ka usoro ngwaahịa ahụ nwee ike igbochi nnyonye anya.Kwalite ma kwalite ihe owuwu a mechiri emechi nke ọma iji gbochie ntinye nke uzuzu dị n'èzí.N'otu oge ahụ, mwepu nke mkpụrụ ndụ mmiri dị n'èzí na-eme ka igwe dum nwee àgwà mgbochi mmiri siri ike, na-eme ka usoro Seal ahụ nwee ike imeghari gburugburu ebe mmepụta ihe siri ike.E wezụga nke ahụ, ndụ ọrụ nwere ike ịgbatị ogologo oge site n'iwebata usoro nhicha onwe onye maka intracavity Dị ka ụdị nkwalite nke Seal-355-3/5, mmepụta laser nke Seal-355-3 / 5S usoro ultraviolet siri ike-ala lasers nwere a. obosara usu dị mkpụmkpụ (<10ns @ 60KHZ) na ezigbo nkwụsi ike usu (<3% RMS @ 60KHZ) na ọkara na ugboro ugboro ugboro ugboro.
Foto ngwaahịa
Gịnị kpatara ịzụrụ n'aka JCZ?
Dịka onye mmekọ dabara adaba, anyị na-enweta ọnụahịa na ọrụ pụrụ iche.
JCZ na-enweta ọnụahịa kacha ala dị ka onye mmekọ dabara adaba, yana ọtụtụ puku laser na-enye iwu kwa afọ.Ya mere, enwere ike ịnye ndị ahịa ọnụahịa asọmpi.
Ọ bụ okwu isi ọwụwa mgbe niile maka ndị ahịa ma ọ bụrụ na akụkụ ndị bụ isi dị ka laser, galvo, njikwa laser sitere na ndị na-eweta ngwaahịa dị iche iche mgbe ọ dị mkpa nkwado.Ịzụta akụkụ niile dị mkpa site na otu onye na-ebubata ihe a pụrụ ịdabere na ya yiri ka ọ bụ ngwọta kachasị mma na doro anya, JCZ bụ nhọrọ kacha mma.
JCZ abụghị ụlọ ọrụ azụmaahịa, anyị nwere ihe karịrị 70 ọkachamara laser, eletriki, ndị injinia sọftụwia, na onye ọrụ 30+ nwere ahụmahụ na ngalaba mmepụta.Ọrụ ahaziri ahazi dị ka nyocha ahaziri ahazi, wiring tupu, na mgbakọ dị.
Nkọwapụta
| Nọmba nlereanya | Akara-355-3 | Akara-355-5 | |
| Ogologo ogologo | 355nm | ||
| Ike pụtara | > 3W @ 30kHZ | 2>5W@40kHZ | |
| Ogologo Pulse | <15ns @ 30kHz | <15ns @ 40kHz | |
| Oke ugboro ugboro | 20KHz-150KHz | ||
| Ọnọdụ oghere | TEMoo | ||
| Ogo beam (M²) | M<1.2 | ||
| okirikiri okirikiri | 2>90% | ||
| Nkuku ihu dị iche iche Beam zuru oke | <2 nkeji | ||
| (1/e2) Dayameta osisi | 0.7 + 0.1mm | ||
| Oke polarization | > 100:1 | ||
| Usoro ntụzịaka | Kehoraizin | ||
| Nkezi Ike kwụsie ike | RMS<3%@24h | ||
| Okpomọkụ na-arụ ọrụ.&RH | 15C ~ 35"C;<80% | ||
| Okpomọkụ & RH | -10C ~ 50C;<<90% | ||
| Ọnọdụ jụrụ oyi | Mmiri jụrụ oyi | ||
| Achọrọ ọkụ eletrik | DC12V | ||
| Oriri Ike | 300W | 350W | |
| Nha akụkụ atọ | 302mm*180mm*114mm(L*W*H) | ||
| Ibu | 9.26 n'arọ | ||
| Nọmba nlereanya | Akara-355-3S Akara-355-5S | |
| Ogologo ogologo | 355nm | |
| Ike pụtara | > 3W@40kHZ | > 5W @ 60kHZ |
| Ogologo Pulse | <10ns @ 40kHz | <10ns @ 60kHz |
| Oke ugboro ugboro | 30KHz-200KHz | |
| Ọnọdụ oghere | TEMoo | |
| (M²) Ogo beam (M²) | M²≤1.2 | |
| okirikiri okirikiri | > 90% | |
| Nkuku ihu dị iche iche Beam zuru oke | ≤2mrad | |
| (1/e2) Dayameta osisi | 0.7 + 0.lm | |
| Oke polarization | > 100:1 | |
| Usoro ntụzịaka | Kehoraizin | |
| Nkezi Ike kwụsie ike | RMS≤3% @ 24h | |
| Pulse-to-PulseStability | RMS≤3% @ 40KHz | RMS≤3% @ 60KHz |
| Okpomọkụ na-arụ ọrụ.&RH | 10 ℃ ~ 35 ℃;<80% | |
| Okpomọkụ & RH | -15 ℃ ~ 50 ℃;<90% | |
| Ọnọdụ jụrụ oyi | Mmiri jụrụ oyi | |
| Achọrọ ọkụ eletrik | DC12V | |
| Nkezi Oriri Ike | 300W | 350W |
| Nha akụkụ atọ | 302mm*180mm*114mm(L*W*H) | |
| Ibu | 9.26 n'arọ | |
| Nọmba nlereanya | Akara-355-10S |
| Ogologo ogologo | 355nm |
| Ike pụtara | ≥10W @ 60kHz |
| Ogologo Pulse | ≤I1ns @ 60kHz |
| Oke ugboro ugboro | 40KHz-300KHz |
| Ọnọdụ oghere | TEMoo |
| BeamQuality(M²) | M≤l.2 |
| okirikiri okirikiri | > 90% |
| Nkuku ihu dị iche iche Beam zuru oke | ≤2mrad" |
| (1/e2) Dayameta osisi | 0.8 + 0.1mm |
| Oke polarization | > 100:1 |
| Usoro ntụzịaka | Kehoraizin |
| Nkezi Ike kwụsie ike | RMSS3%@24h |
| Nkwụsi ike Pulse-na-Pulse | RMSS3% @ 60KHz |
| Okpomọkụ na-arụ ọrụ.&RH | 15"C ~ 35"C;<<80% |
| Okpomọkụ & RH | 0"C ~ 50"C;<90% |
| Ọnọdụ jụrụ oyi | Mmiri jụrụ oyi |
| Achọrọ ọkụ eletrik | DC36V |
| Nkezi Oriri Ike | 250W |
| Nha akụkụ atọ | 337mm*180mm*114mm(L*W*H) |
| Ibu | 13.2kg |
| Nọmba nlereanya | Akara-355-15S |
| Ogologo ogologo | 355nm |
| Ike pụtara | ≥15W@60KHZ |
| Ogologo Pulse | ≤12ns @ 60KHZ |
| Oke ugboro ugboro | 40KHz-300KHZ |
| Ọnọdụ oghere | TEMoo |
| (M²) Ogo beam (M²) | M² <1.2 |
| okirikiri okirikiri | > 90% |
| Beam Full Divergence Akụkụ | ≤2mrad |
| (1/e2) Dayameta osisi | 0.8 + 0.1mm2 |
| Oke polarization | > 100:1 |
| Usoro ntụzịaka | Kehoraizin |
| Nkezi Ike Nkwụsi ike | RMS≤3% @ 24h |
| Pulseto-Pulse kwụsie ike | RMS≤3% @ 60KHz |
| Okpomọkụ na-arụ ọrụ.&RH | 15°C ~ 35°C; <80% |
| Okpomọkụ & RH | 0°C ~ 50°C;<90% |
| Ọnọdụ jụrụ oyi | Mmiri jụrụ oyi |
| Achọrọ ọkụ eletrik | DC36V |
| Nkezi Ike Oriri | 300W |
| Nha akụkụ atọ | 337mm*180mm*114mm(L*W*H) |
| ibu | 13.2kg |
Akụkụ ngwaahịa
