INVISCAN China 3 Axis Galvo Scanner oo leh VCM Motor
Xawaaraha Sare 3 Axis Galvo Scan Head oo leh VMC Motor si loogu calaamadiyo, Goynta, alxanka...
INVINSCAN Taxanaha 3D laser galvo scanner madaxa ayaa leh dhidibka XYZ.dhidibka Z-axis wuxuu u shaqeeyaa sidii diirada saarista, kaas oo bedeli doona masaafada shaqada ee u dhaxaysa lenska f-theta iyo walxaha iyadoo loo eegayo dhererka shayga.Iyadoo la shaqaynaysa kontaroolaha DLC2-M4-3D iyo software EZCAD3, farsamaynta laysarka sida calaamadaynta waxaa loo samayn karaa si fudud oo hufan.
*Qiimaha SareXawaaraha sawirka>10000mm/S
* Ganaax sareKu celcelinta <2um
*Xasilooni: Heerkulka waqti dheer oo qulqulaya <5urad
*Labis: Khaladka dhexroorka barta gudaha inta u dhaxaysa habaynta<19%
* Ganaax sareKu celcelinta <2um
*Xasilooni: Heerkulka waqti dheer oo qulqulaya <5urad
*Labis: Khaladka dhexroorka barta gudaha inta u dhaxaysa habaynta<19%
Sawirada Alaabta
Tilmaamaha
| A1064-10 | A355-14A | 355-10A | 1064-14A | |
| Aperture Beam | 10mm | 14mm | 10mm | 14mm |
| Mawjada dhererka | 1030-1070nm | 355nm | ||
| Xawaaraha Calaamadaynta ugu badan | 450cps/s | 700cps/s | 450cps/s | 700cps/s |
| Xawaaraha meelaynta | 7m/s | 10m/s | 7m/s | 10m/s |
| Khaladka Dabagalka | 0.3ms | 0.18ms | 0.3ms | 0.18ms |
| Saxnimada Calaamadaynta soo noqnoqota | <2μrad | |||
| Socod Dheer (> 8 saacadood) | <5urad | |||
| Xagasha leexinta shaqaynaysa | ±20° | |||
| Saamiga Balaadhinta Beam | 1.6 | 2.8 | 1.6 | |
| Baratakoolka | XY2-100 | |||
| Awoodda ugu badan ee la awoodi karo | 250W | 10W | 25W | |
| Goobta Nidaamka Dhacdada | 7mm | 6mm | 3.5mm | 7mm |
| Heerkulka shaqada | 25± 10 ℃ | |||
| Aagga Calaamadaynta | 70*70,100*100,150*150,200*200,300*300 | |||
| Hadda & Voltage | ± 15VDC,≥3A;24V 3A | |||
Cabirka Alaabta
INVINSCAN
INVINSCAN
