|Place of Origin:||CHINA|
|Minimum Order Quantity:||1SET|
laser marking systems,
SPI laser marking card can be used to control the SPI G4.0 laser machine to marking,engraving,cutting on surface of material.Software EZCAD Support SPI laser type.
|Output digital signals for digital scan head.|
|Mark-on-fly:encoder can be connected to the board to measure the fly speed .|
|Multiple boards on 1 computer: One computer can control up to 8 control board to mark different pattern simultaneously|
|Extend axis output:Two Direction/pulse signals,used to control stepping motor or servomotor for rotary marking and split marking.|
|13 routes of input(TTL compliant) .In0, In4-In13, XORG0(IN14), YORG0(IN15) .|
|8 routes of output(TTL compliant) .Out0-7 output from CON5 ,and out4-7 could be OC.|
|Power supply parameters: DC5V/3A|
|Connector: USB connector/DB connector|
|Signal: 8 routes general digital signal.(TTL compatible)|
|Protect the board from humidity, dust, corrosive vapors and mechanical stress.|
|Carefully check your application program before running it. Programming errors can cause a break down of the system. In this case neither the laser nor the scan head can be controlled.|
For storage and operation, avoid electromagnetic fields and static electricity.
These can damage the electronics on the product. For storage, always use the anti-static bag.
|The allowed operating temperature range is 25℃ ± 10℃.|
|The storage temperature should be between –20℃ and +60℃.|
|DB9 male/female sockets||USB cable (1.5m)|
|DB15 male/female sockets||CD|
Work stable,operation simple,easy to learn,famous software EZCAD,low cost,USB connection.
Contact Person: jcz