FIBER - Lite Manual Laser Control Card For Pulse Fiber Laser Marking Card
|Place of Origin:||CHINA|
|Minimum Order Quantity:||1set|
co2 laser driver,
Fiber-Lite control card can control whole type fiber laser machine for laser marking and laser engraving .The software EZCAD Support CO2,YAG,IPG,SPI laser, adjusting currents, frequency, duty ratio in software
- DB25 socket to control laser.
- Digital scan head signal.
- 6 route of input signal(TTL compatible):IN0~IN3,IN5,IN14,IN0-IN3 is for laser
- 2 route of output signal(TTL compatible):Out0
- START:this function is used to remark what ever is in the memory of the board, especially
convenient for high speed marking of a same pattern.
- Compatible with USB2.0 specifications
- Supports single path expansion axis
- Laser Marking
- Laser Engraving
- Drilling circuit board with holes
- Cutting cloth
- Laser marking on metal
Support single path expansion axis
|LMCFIBER-lite is designed especially for fiber laser marker,connect with PC through USB port.|
|DB25 socket to control laser.|
|6 route of input signal(TTL compatible):IN0~IN3,IN5,IN14,IN0-IN3 is for laser
|2 route of output signal(TTL compatible):Out0|
|START:this function is used to remark what ever is in the memory of the board, especially
convenient for high speed marking ofa same pattern.
|Compatible with USB2.0 specifications|
|6 route of input signal(TTL compatible)|
|1 route of output signal(TTL compatible)|
|Using USB2.0 specifications|
|Protect the board from humidity, dust, corrosive vapors and mechanical stress.|
|Carefully check your application program before running it. Programming errors can cause a break down of the system. In this case neither the laser nor the scan head can be controlled.|
|The allowed operating temperature range is 25℃ ± 10℃.|
|The storage temperature should be between –20℃ and +60℃.|
|DB9 male/female sockets||USB cable (1.5m)|
|DB15 male/female sockets||CD|
Work stable,operation simple,easy to learn,famous software EZCAD,low cost,USB connection.
Contact Person: jcz